Product Description

ProctorWrap™ HTR is a heavy weight, UV stabilised, tear resistant 3-ply spun-bonded polyolefin membrane with reinforcement scrim. ProctorWrap HTR meets the requirements of AS/NZS 4200.1:2017 and is suitable for use in roof and wall applications

 

WP Supplies, your pallet buy & tape specialist.

Special Order Product

Applications

ProctorWrap HTR is medium duty classification and suitable for use underneath metal sheet, slate and tiled roofs. Being heavier weight, ProctorWrap HTR is commonly used for pitched roofs, heritage projects, and under natural slate and tiled roofs where during construction the membrane is exposed to higher levels of foot traffic and wind loads. ProctorWrap HTR can significantly reduce the risk of condensation in the roof space, when designed and installed correctly. HTR is suitable for use in BAL regions 12.5 to 40 in accordance with AS 3959.

Installation

ProctorWrap HTR should be installed in accordance with AS/NZS 4200.2 Pliable Building Membranes and Underlays, Part 2 Installation Requirements and in full accordance with the product installation guide. ProctorWrap HTR must be installed with the printed surface facing outwards.

Durability

Although ProctorWrap HTR can be used as temporary protection during construction, it is not a waterproof membrane as classified by AS 4654.2. The product may be damaged by careless handling, high winds or vandalism. Any damaged areas should be replaced before completion. To ensure maximum long term durability, ensure that ProctorWrap HTR is covered up by the primary roofing or cladding material as soon as possible, and not left exposed to UV for longer than 2 months.

Proctor recommends ProctorWrap HighTack PLUS Tape.

 

(PROCTOR-HTR)

SKU PROCTOR-HTR

Be The First To Review This Product!

Help other WP Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review