Plastic Ventilated Roof Battens

A plastic, ventilated batten available in two sizes (11 and 18mm thick) made from tough, non-absorbent polypropylene, and with a self-adhesive strip for convenient placement before nailing off.

They have a self-adhesive strip for convenient placement prior to nailing off. Part of an alternate solution, Masons Ventilated Battens are used to form a gap under the roof cladding and underlay and above the roof purlins, allowing the free flow of air. This assists with the ventilation of roof cavities, carrying away unwanted condensation moisture, and moderating heat build up under roof cladding. The cellular construction excludes vermin, is non-absorbent, non-conductive, capillary action resistant, dimensionally stable, chemical resistant and assists with reducing thermal bridging. They are robust with a good chemical resistance, tensile and compressive properties.

USES For use as non structural ventilated roof battens as part of a passive roof ventilation design. May be used for all roofing types, and in all wind zones up to SED. May be used with timber or steel roof framing, and both synthetic roof underlay and bitumen impregnated kraft paper underlay. May be used under ply wood layers and shingle roofs. May be used in residential or commercial construction*. The building designer is responsible for the design of the passive roof ventilation system.

Contact WPS for Masons ventilated roof batten Design and Installation Guide for more.

 

(15547323)

SKU 15547323

Be The First To Review This Product!

Help other WP Supplies users shop smarter by writing reviews for products you have purchased.

Write a product review