WRAP-IT-FAST Nail Guns & Consumables for Steel Frames Building Wraps

Pre-Order now!! Due 30/8/26

Fast, simple & cost-effective solution for Insulation Wrap Installers. Extremely fast when used together with our spray adhesive. 

WP Supplies previously offered our valued customers with an alternative gun and washer system. During this time WPS gained valuable insights into the strenghts & weakness of the previous system supplied.  After listening to feedback and working with our customers, together we developed our own improved nail gun based solution with outcome being the primary focus. 

Introducing WRAP-IT-FAST the better choice. Switch today & save $$

 Free Shipping on WRAP-IT-FAST Products only

2 Great Solutions Working Together (Spray & Washer)

Bonus Adhesive Spray 500ml with every 2,000 pack sold (Excludes sales to TAS & WA) Unlike other suppliers in the market, WP Supplies is adding a free can of Pro House Wrap Adhesive spray with every 2,000 pack of consumables sold. This product is great around windows & openings.

Features & Benefits

• Fast, simple & secure especially when used with our spray adhesive.

• Brushless Battery Tool, No need to buy expensive smelly gas cartridges saving you $$. 

• Reduce install time, save staffing cost & gain a competative advantage over other installers.

• Competitive pricing; contact WPS for better pricing/volume discounts. Switch and save.

• Free freight to metro VIC, NSW, ACT, QLD, SA, TAS & WA.

• Freight to Regional Centres POA

• Magnetic adaptor positions the washer perfectly in place

• Magnetic head compatable with Iccons GTW25 25mm steel washers.

• Our consumables are compatable with both AA Fasteners Battery Nailer & magentic head.

• Our consumables are compatable with Iccons GT-3 Gas tools fitted with magnetic adaptor GTW25ADAPTOR.

• Tool is compatible with Hilti X-P B3 MX,  X-C B3 MX, X-S B3 MX & Ramset gas concrete nails.

• The low profile system is more user friendly for the trades following the insulation wrap.

• Ideally suited for steel frames and purlins made from 1mm-5mm thick steel. 

• 12 Month Warranty from WP Supplies with a Melbourne based tool repairing accessing, repairing & servicing the guns. (Non transferable).

• Start up packages available which can be combined with Building Wrap and other related consumables. 

• Ask the WPS Team about our related adhesive spray.

Yes these consumables are compatible with other leading brands/systems in the market. Contact the WPS Team for details before ordering.

Please note the new steel washers require new nails. The older smooth nails will not work.

Simple tips on how to achieve the best outcome.

Position the washers off centre towards the elbow of the steel frame.

Use spray adhesive/Double sided tape with the steel washers.

We strongly recommend appropriate PPE gear is worn while operating these tools.

PRODUCT FEATURES SLC80:34.6 dB, class 5 Certified to AS/NZS 1270 Standard Foldable and adjustable headband design for a perfect fit Optimal earmuff shape provides pressure-free protection for the outer ear Sound block solid cup ensures optimal noise protection Soft memory foam ear cushions ensure optimal wearer comfort Industrial earmuffs with high level of performance

PRODUCT FEATURES Certified to AS/NZS 1337.1:2010 Medium impact 99.9% UV protection One piece polycarbonate wraparound lens Qty/Box - 12 Qty/Carton - 288 Close fitting & lightweight for all day comfort

Please contact the WPS Team as we are currently clearing out our old stock of AA Fasteners tools & consumables as we shift towards an improved solution. 

Contact the WPS Team for details & conditions.

Wrap It Fast Insulation Nail Gun — Built for Steel Frame & Sarking

If you've ever tried fixing reflective foil to a steel purlin with a standard fastener, you already know the problem. The wrap tears, the fixing backs out, and you're back up the ladder redoing a section you already finished. Wrap It Fast was built around that exact headache

It's a gas-powered fastening system designed specifically for sheds, patios and steel-framed builds where sarking or reflective foil insulation needs to go up quickly and stay put. No screws, no pre-drilling, no second trip up the ladder.

How the Wrap It Fast System Works

Most trades still fix sarking the way they'd fix anything else to steel — with a screw gun and a washer, one at a time. It works, but it's slow, and on a big roof or shed wall the time adds up fast.

Wrap It Fast swaps that out for a gas-powered nailer purpose-built for steel frame. You load it, you fire it, the washer and fastener go in as one action. There's no pilot hole to line up and no washer to hold in place with your other hand while you drive the screw.

Gas-Powered Fastening vs Screw Guns

A screw gun asks you to do three things at once — hold the wrap flat, hold the washer in place, and drive the fastener straight. Wrap It Fast does all three in a single trigger pull, which is where most of the time saving comes from on a full sheet or a long purlin run.

Compatible Steel Frame Types

Built to work across the steel members you'd actually find on a shed or patio job — purlins, girts and light steel studs. If you're working with heavier structural steel, check the specs table below before ordering, since fastener penetration will vary by gauge.

Compatible Steel Frame Types

Sarking is the term most trades use for reflective foil wrap, and it's also where most standard fasteners let you down. Foil doesn't behave like sheet metal or plasterboard — it's thin, it moves in the wind before it's fixed, and a standard nail or screw head will punch straight through it if you're not careful.

Why Standard Fasteners Fail on Reflective Wrap

A normal fastener head is too small to spread load across foil. It either tears through on impact or works loose once the wrap starts flexing in the wind — which on an exposed roof happens more often than people expect.

The Washer System, Explained

Wrap It Fast pairs every fastener with a purpose-sized washer in the same action, so the load spreads across the foil instead of concentrating on one point. That's the difference between a fixing that holds for the life of the shed and one you're back out to replace in twelve months.

Insulation Washers & Washer System

The washer is doing more work here than people give it credit for. Get the washer wrong — too small, wrong material, wrong fit for the gun — and the fastening fails even if the gun itself is doing its job.

Washer Specs

Washers are sized to match standard sarking and reflective foil gauges, in a steel variant built to handle exposure without corroding out early. Full dimensions are in the specs table below.

Steel-Specific Washer Variant

For steel frame jobs specifically, there's a heavier washer variant designed to bite into steel purlins without deforming — worth checking if you're working purlins rather than lighter stud framing.

Consumables & Gas Cartridges

Once you've got the gun, the ongoing cost is consumables — nails, washers and gas cartridges. Getting the wrong SKU is the single most common hold-up trades run into, so this section is here to save you a phone call.

Ordering as a Bundle

Nails, washers and gas cartridges are sold as matched sets so you're not guessing whether one brand's washer fits another's fastener. If you're stocking up for a run of jobs, ordering the bundle is the simpler path.

Compatibility Notes

Always check your gun model against the consumable pack before ordering — older and newer versions of the system use slightly different washer profiles, and mismatched consumables are the most common cause of jams.

Who Uses Wrap It Fast

This system was built with a specific job in mind, and it shows in how it's used on-site.

Steel Purlin Installers

Shed builders, patio installers and carport trades running steel purlin frames are the core user base — anyone fixing sarking across a full roof or wall run, where the time saved per fastener adds up across hundreds of fixings a day.

Specs & Compatibility